Description
This article deals with a jet of air at a lower temperature than the environment, which dischargesonto a flat aluminum plate located over a matrix of sensors that measures the temperature in thearea of impact. Subsequently, characteristic curves are found for each height and diameter ratioof the jet (H/D), through data processing. The coefficient of convection is determined using therelationship between the slope of the graph together with the result from the temporal evolutionof the temperature.The main objective of the work is the verification of the functionality of the advanced electronicdevice, which is carried out successfully. Also, and using visualization techniques the behaviorof the jet is analyzed. Both the electronic device and the use of air jets have great interest inthe industry (refrigeration, heating, drying processes, cleaning among others). In the case ofthe advance electronic device it is possible to provide data regarding real-time temperaturemeasurement in areas of difficult access.
Este artículo considera un chorro de aire a una temperatura menor al ambiente, que impactauna placa plana de aluminio colocada sobre una matriz de sensores capaces de medir latemperatura en el área de impacto. Posteriormente, mediante un procesamiento de los datos seencuentran curvas características para cada relación adimensional entre la altura y el diámetrode salida del chorro (H/D). Se determina el coeficiente de convección o película utilizando larelación entre la pendiente de la gráfica resultante de la evolución temporal de la temperaturay las propiedades físicas del aluminio.El objetivo principal del trabajo es la comprobación de la funcionalidad del dispositivo electrónico,el cual se realiza con éxito. Además, se utilizan técnicas de visualización para comprobar elcomportamiento del chorro de aire fresco al impactar la placa. Tanto el dispositivo, como lautilización de chorros de aire tienen amplias funcionalidades en la industria (refrigeración,calefacción, procesos de secado, limpieza, entre otros) y algunas más específicas para eldispositivo como la medición a tiempo real de temperaturas en dos dimensiones en zonas dedifícil acceso.