Mostrar el registro sencillo del ítem

Prevención del golpe de ariete mediante el control del tiempo de cierre, al usar válvulas hidráulicas automatizadas

dc.creatorGuevara-Rodríguez, Gregory
dc.creatorVargas-Obando, Adrian
dc.creatorQuesada-Chanto, Juan Ignacio
dc.date2021-02-11
dc.identifierhttps://revistas.tec.ac.cr/index.php/tec_marcha/article/view/4821
dc.identifier10.18845/tm.v34i1.4821
dc.descriptionOne of the greatest challenges we face when calibrating automatic systems in irrigation and aqueducts is the high speed of the electric actuators; it reduces the speed of response of the valves in terms of opening and closing to a few seconds. These sudden closures in the line of conduction promote waves inside the pipe that produce overpressures that may generate damages in the aqueduct. The present work is intended to offer an alternative approach to control and prevention of water hammer, by means of the analysis of the relationship between the closing time of the valve, in a conduction with positive slope; the respective increasing in the piezometric line, and how both can be regulated by calibration in the filling speed of the upper chamber of the hydraulic valves. To verify the results, the work shows a case study of a hydroponic greenhouse project that operates with automatic irrigation,  where the valves closing time was calibrated by the filling control of the upper chamber of the hydraulic valves.en-US
dc.descriptionUno de los grandes retos que enfrentamos, al calibrar sistemas automáticos en riego y acueductos, es que la velocidad de los activadores eléctricos es muy rápida, lo que reduce  la velocidad de respuesta de las válvulas en términos de apertura y cierre a algunos cuantos segundos. Estos cierres repentinos en la línea de conducción provocan ondas en el interior de la tubería que producen sobrepresiones que pueden generar daños en nuestro acueducto. El presente trabajo ofrece un enfoque alternativo al control y prevención del golpe de ariete, al analizar la relación entre el tiempo de cierre de una válvula en una conducción con pendiente positiva, el respectivo aumento en la línea piozométrica y cómo se puede regular esto mediante la calibración de la velocidad de cierre en el llenado de la cámara superior de las válvulas hidráulicas. Para la comprobación de los resultados, se muestra el caso de un proyecto de invernaderos, hidropónico, que opera con riegos automáticos, donde el tiempo de apertura y cierre de válvulas fue calibrado mediante el control del llenado de las cámaras de las válvulas.es-ES
dc.formatapplication/pdf
dc.formattext/html
dc.languagespa
dc.publisherEditorial Tecnológica de Costa Rica (entidad editora)es-ES
dc.relationhttps://revistas.tec.ac.cr/index.php/tec_marcha/article/view/4821/5398
dc.relationhttps://revistas.tec.ac.cr/index.php/tec_marcha/article/view/4821/5491
dc.rightsDerechos de autor 2021 Revista Tecnología en Marchaes-ES
dc.rightshttps://creativecommons.org/licenses/by-nc-nd/4.0es-ES
dc.sourceTecnología en marcha Journal; 2021: Vol. 34 Núm. 1: Enero-Marzo 2021; Pág. 143-154en-US
dc.sourceRevista Tecnología en Marcha; 2021: Vol. 34 Núm. 1: Enero-Marzo 2021; Pág. 143-154es-ES
dc.source2215-3241
dc.source0379-3982
dc.subjectGolpe de arietees-ES
dc.subjectAcueductoses-ES
dc.subjectVálvulas hidráulicases-ES
dc.subjectWater hammeren-US
dc.subjectAqueductsen-US
dc.subjectHydraulic valvesen-US
dc.titlePrevention of water hammer through control of the closing time, in automated hydraulic valvesen-US
dc.titlePrevención del golpe de ariete mediante el control del tiempo de cierre, al usar válvulas hidráulicas automatizadases-ES
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion


Ficheros en el ítem

FicherosTamañoFormatoVer

No hay ficheros asociados a este ítem.

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem