Descripción
Este artículo presenta la experiencia generada durante la inspección detallada de la superestructura del puente Virilla, ruta nacional N° 1, como parte del proyecto de investigación eBridge 2.0: sistema integrado para el desempeño de puentes y a solicitud del Consejo Nacional de Vialidad (CONAVI), con base en el Contrato interadministrativo entre el CONAVI y el Tecnológico de Costa Rica (TEC). En este trabajo se realiza una descripción general del puente en estudio, así como una inspección inicial de la estructura y se dispone de un modelo analítico del puente para el análisis estructural. Las mediciones realizadas permitieron cuantificar las magnitudes vibratorias y la deformación en varias secciones del puente, en condición de tránsito vehicular en servicio (comportamiento ambiental). Los resultados experimentales obtenidos se comparan con el modelado analítico computacional de la estructura y este a su vez con normas nacionales e internacionales.
This article presents the experience generated during the detailed inspection of the superstructure at the Virilla bridge, National Route N° 1, as part of the research project “eBridge 2.0: integrated bridge system performance”, by request of the National Roads Authority (CONAVI) and based on the existing inter-contract between CONAVI and the Technological Institute of Costa Rica (TEC). In this paper an overview of the bridge main features is described with an initial inspection of the structure is performed and also it is provided an analytical model of the bridge for structural analysis. The measurements allowed quantifying the vibration magnitudes and deformation in various sections of the bridge, on condition of vehicular traffic service (environmental performance). The experimental results are compared with computational analytical modeling of the structure and also with national and international standards.