Buscar
Mostrando ítems 11-20 de 27
Reducing warp and checking in 4 by 4 beams from small-diameter tropical species (tectona grandis, gmelina arborea, and cordia alliodora) obtained by turning the pith inside out.
(Forest Products Society, 2015)
Small-diameter logs from plantation trees are prone to warp and to produce checks due to the presence of juvenile wood, growth stresses, and asymmetric shrinkage during the drying process. In the present study, we analyzed ...
Production and quality analysis of pellets manufactured from five potential energy crops in the Northern Region of Costa Rica
(Biomass and Bioenergy, 2016)
Modifications to a pellet manufacturing process must be made based on the characteristics of raw
material used. The purpose of this work was to determine the alternations required to a wood pellet
manufacturing process ...
Mineral content in relation to radial position, altitude, chemical properties and density of persian ironwood
(Universidade Federal de Sao Carlos, 2015)
Persian ironwood (Parrotia persica) is native species from Iran and covers 10,54% of the commercial volume. Its wood structure and its chemical composition are affected by growth conditions. The aim of the study was to ...
Characterisation of pellets made from oil palm residues in Costa Rica
(Journal of Oil Palm Research, 2016)
Presently, there are around 67 000 ha of oil palm (Elaeis guineensis) in Costa Rica. The resulting post-harvest residues are not being used currently. These residues can be employed for generation of heat by means of ...
Characteristics and properties of torrefied biomass pellets from Gmelina arborea and Dipterix panamensis at different times
(Revista Chapingo, Serie Ciencias Forestales y del Ambiente, 2016)
Torrefaction and pelletizing were studied in the generation of energy from
lignocellulosic residues to increase the energy properties of the biomass. The aim of
this study was torrefied sawdust from Gmelina arborea and ...
General, physical and mechanical properties, termites resistance and drying defects of lumber of Tectona grandis from plantations of different climatic and sites fertility condition
(Springer India, 2015-06)
The influence of climatic and site fertility conditions affect wood quality from fast growing trees. The change in tree diameter, thickness of sapwood, heartwood percentage and bark and pith tissue, physical and mechanical ...
Quality of pellets made from agricultural and forestry crops in costa rican tropical climates
(North Carolina State University, 2015)
Pellets may be produced with different types of agriculture or forestry crops in Costa Rica. This work evaluated the energy, physical, and mechanical properties of pellets fabricated from 12 types of agricultural and ...
Balance Energético en Dos Sistemas de Secado de Residuos Ligno-Celulósicos Producidos en Costa Rica.
(Instituto Tecnológico de Costa Rica., 2012)
Los desechos ligno-celulósicos en la agricultura y en el sector forestal constituyen un alto porcentaje. La industria forestal se caracteriza por presentar una baja eficiencia en la utilización de la materia prima (40-60%), ...
Effects of adding multiwall carbon nanotubes on performance of polyvinyl acetate and urea-formaldehyde adhesives in tropical timber species
(Hindawi Publishing Corporation, 2015)
Multiwall carbon nanotubes (MWCNTs) functionalized with hydroxyl groups (MWCNTs-OH) have been incorporated into polyvinyl acetate (PVAc) and urea-formaldehyde (UF) adhesives utilized in tropical wood gluing. The Raman ...
Effects of thinning on diameter, heartwood, density and drying defects of gmelina arborea
(Universidade Federal de Sao Carlos, 2015)
The effect of three levels thinning intensity in Gmelina arborea plantation on tree diameter, heartwood (diameter and percentage), wood density and drying defects (twist, crook, bow and check) was studied. Wood used for ...