Tecnológico de Costa Rica
  • ¿Cómo publicar en el Repositorio TEC?
  • Políticas
  • Recursos Educativos
  • Contáctenos
    • español
    • English
  • español 
    • español
    • English
  • Login
Ver ítem 
  •   Página Principal
  • Trabajos de Graduación
  • Biblioteca José Figueres Ferrer
  • Escuela de Ingeniería en Construcción
  • Licenciatura en Ingeniería en Construcción
  • Ver ítem
  •   Página Principal
  • Trabajos de Graduación
  • Biblioteca José Figueres Ferrer
  • Escuela de Ingeniería en Construcción
  • Licenciatura en Ingeniería en Construcción
  • Ver ítem
JavaScript is disabled for your browser. Some features of this site may not work without it.

Listar

Todo el RepositorioComunidades & ColeccionesPor fecha de publicaciónAutoresTítulosPalabras clavesTipo de Recurso EducativoDestinatarioEsta colecciónPor fecha de publicaciónAutoresTítulosPalabras clavesTipo de Recurso EducativoDestinatario

Mi cuenta

AccederRegistro

Estadísticas

Ver Estadísticas de uso

Prefabricación, Transporte y Ensamblaje de la Estructura Metálica de un Tanque de Almacenamiento de Agua Potable para Los Chiles

Thumbnail
Ver/
Prefabricación_transporte_ensamblaje_estructura_metálica _tanque_almacenamiento_agua_potable _Los_Chiles.pdf (41.00Mb)
Fecha
2014
Autor
Núñez-Corrales, Paulo
Metadatos
Mostrar el registro completo del ítem
Resumen
The water supply problem in Costa Rica, lies in the lack of adequate water infrastructure, which prevents us to meet the demand due to population growth as well as commercial, industrial and tourist level. In this paper, the logistic aspects of shop prefabrication, transport and site assembly in a metal tank for water storage of 250 m3 of capacity located in Los Chiles, Alajuela are analyzed. This by analyzing space and equipment limitations both in plan and on-site, determining the level of pre assembly with which the elements would be manufactured and transported and the development of procedures for the execution of the work. In addition, a dynamic seismic analysis of the structure, using models developed in SAP2000, is performed to determine the most characteristic critical points of the structure, to provide general recommendations regarding the frequency and inspection criteria and some of the preventive maintenance actions. The analysis concludes that the best way to manufacture and transport the support structure is by independent elements, while the cylinder into two sections. The procedures established in the assembly manual represented a prerequisite for the analysis and understanding of the assembly process. Additionally, the seismic analysis found that the structural design of the tank is very conservative, therefore the stress values found in the characteristic elements are low.
Descripción
Proyecto de Graduación (Licenciatura en Ingeniería en Construcción). Instituto Tecnológico de Costa Rica. Escuela de Ingeniería en Construcción, 2014.
URI
https://hdl.handle.net/2238/6192
Compartir
       
Métricas
Colecciones
  • Licenciatura en Ingeniería en Construcción [552]

|Contáctenos

Repositorio Institucional del Tecnológico de Costa Rica

Sistema de Bibliotecas del TEC | SIBITEC

© DERECHOS RESERVADOS. Un sitio soportado por DSpace(v. 6.3)

RT-1

 

 


|Contáctenos

Repositorio Institucional del Tecnológico de Costa Rica

Sistema de Bibliotecas del TEC | SIBITEC

© DERECHOS RESERVADOS. Un sitio soportado por DSpace(v. 6.3)

RT-1