Tecnológico de Costa Rica
  • ¿Cómo publicar en el Repositorio TEC?
  • Políticas
  • Recursos Educativos
  • Contáctenos
    • español
    • English
  • español 
    • español
    • English
  • Login
Ver ítem 
  •   Página Principal
  • Trabajos de Graduación
  • Biblioteca José Figueres Ferrer
  • Escuela de Ingeniería Electrónica
  • Licenciatura en Ingeniería Electrónica
  • Ver ítem
  •   Página Principal
  • Trabajos de Graduación
  • Biblioteca José Figueres Ferrer
  • Escuela de Ingeniería Electrónica
  • Licenciatura en Ingeniería Electrónica
  • Ver ítem
JavaScript is disabled for your browser. Some features of this site may not work without it.

Listar

Todo el RepositorioComunidades & ColeccionesPor fecha de publicaciónAutoresTítulosPalabras clavesTipo de Recurso EducativoDestinatarioEsta colecciónPor fecha de publicaciónAutoresTítulosPalabras clavesTipo de Recurso EducativoDestinatario

Mi cuenta

AccederRegistro

Estadísticas

Ver Estadísticas de uso

Sistema electrónico para el correcto ensamble de conectores y sistema de visión artificial, para el reconocimiento de fallas en el patrón de color de los cables en conectores discretos.

Thumbnail
Ver/
Sistema_electronico_correcto_ensamble_conectores_sistema_vision_artificial_reconocimiento_fallas_patron_color_cables_conectores_discretos.pdf (3.609Mb)
Fecha
2017
Autor
Sáenz-Fernández, Isaac
Metadatos
Mostrar el registro completo del ítem
Resumen
Cables and connectors represent the fundamental base of electronic systems without them most of the devices used daily as cell phones, tablet computers among many others, would not work. For example, if there are flaws in some inner wires of conventional cell phone use, said movable stop functioning immediately following the affected person would be in a state of confinement to replace or repair the device. For this reason, in building quality cables and connectors it is essential and one of the most important features in production. SAMTEC company reaches Costa Rica in 2006, since then produces over 1,000 different products used in cars as well as airplanes computers at NASA and the US Army. Quality, hand in hand with performance verification systems and extensive testing 100% of production guarantee products of high demand for efficiency and effectiveness. Being one of the goals SAMTEC the keep pace with technological growth and meet the expectations of the demanding labor market, it proposes the development of a project, which aims to eliminate production errors in connectors have cable color, which they have a color pattern set by the client and that order should not be altered. These connectors are of SFSD of SAMTEC series and assembled manually by an operator inserting each wire individually so that human error is the basis of the problem. To achieve eliminate production problems two stages were developed, the first one assisted assembly system for the operator, where using a visual aid, it shows the position and color of the cable to be inserted once the cable set, it indicates the position and color of the next cable. The second stage is a final check of the finished connector, where by a camera and Vision Builder National Instruments software, verified that all cables are in the position that corresponds as color pattern, otherwise, the system indicates that an error exists in the connector.
Descripción
Proyecto de Graduación (Licenciatura en Ingeniería Electrónica) Instituto Tecnológico de Costa Rica. Escuela de Ingeniería Electrónica, 2017.
URI
https://hdl.handle.net/2238/7285
Compartir
       
Métricas
Colecciones
  • Licenciatura en Ingeniería Electrónica [500]

|Contáctenos

Repositorio Institucional del Tecnológico de Costa Rica

Sistema de Bibliotecas del TEC | SIBITEC

© DERECHOS RESERVADOS. Un sitio soportado por DSpace(v. 6.3)

RT-1

 

 


|Contáctenos

Repositorio Institucional del Tecnológico de Costa Rica

Sistema de Bibliotecas del TEC | SIBITEC

© DERECHOS RESERVADOS. Un sitio soportado por DSpace(v. 6.3)

RT-1