Buscar
Mostrando ítems 211-220 de 275
Metodología para la determinación de la carga viva real sobre un puente utilizando instrumentación electrónica
(Instituto Tecnológico de Costa Rica, 2012)
This project shows the obtained results of the real live load determination study on the Purires bridge, through the instrumentation with deformation, deflection and joint displacement sensors. This project was performed ...
Plan de Gestión de Calidad en el Proyecto Aporte la Flor del Proyecto Hidroeléctrico Toro 3 utilizando la guía PMI
(Instituto Tecnológico de Costa Rica, 2012)
The present paper was performed under the Directed Professional Practice mode to opt for a Degree in Construction Engineering.
The project was developed in Proyecto Toro 3 ICE, in the construction of the Aporte La Flor, ...
Inventario e inspección de 10 puentes ubicados en las rutas cantonales de San Ramón de Alajuela
(Instituto Tecnológico de Costa Rica, 2018)
The main objective of this work is to inventory and inspect ten bridges belonging to roadways which are administered by San Ramon’s Municipal Administration. The bridges are located at San Rafael and Santiago districts. ...
Aplicación de la filosofía LEAN en la construcción del centro comercial Zona Centro.
(Instituto Tecnológico de Costa Rica, 2015)
This project aims to optimize the use of financial, human , material and financial resources in the construction of Zona Centro Mall made by EDIFICAR company, applying the LEAN philosophy.
A review of information pertaining ...
Planeamiento Constructivo del Revestimiento del Túnel de Conducción Principal del Proyecto Hidroeléctrico Balsa Inferior
(Instituto Tecnológico de Costa Rica, 2012)
El presente documento muestra paso a paso la realización de la planificación de la construcción del revestimiento del túnel de conducción principal del Proyecto Hidroeléctrico Balsa Inferior (PHBI), propiedad de la Compañía ...
Evaluación de los Métodos para el Cálculo de Caudales Máximos Probables instantáneos en Edificaciones
(Instituto Tecnológico de Costa Rica, 2013)
The design methodologies of the probable max flow in buildings is based on empirical, half empirical and probabilistic subsistence, most of them estimated long time ago with high intake health hardware, what makes its ...
Análisis, comparación y diseño optimizado para muros de Contención
(Instituto Tecnológico de Costa Rica., 2016)
Retaining walls are structural elements used to contain masses of soil, which are being analyzed in this document are mainly compound of two elements, the stem and the base plate.
There are many types and designs of walls, ...
Alternativas para la estabilización de taludes en el cantón de León Cortés
(Instituto Tecnológico de Costa Rica., 2015)
This project is to provide comprehensive solutions to the problems of slope stabilization, due to the geomorphology of the canton of Leon Cortes, as it is characterized by a topography of steep slopes and high precipitation ...
Resistencia del mortero hidráulico a cinco edades diferentes utilizando cinco tipos de cemento nacional
(Instituto Tecnológico de Costa Rica, 2016)
This project shows a study on the results obtained by analyzing the behavior of the compressive strength of the hydraulic mortar at advanced ages (7, 14, 28, 56 and 90 days) using cement of national origin of type UG (two ...
Diseño de la intervención para la estructura de pavimento flexible en secciones representativas de la red vial cantonal de Curridabat
(Instituto Tecnológico de Costa Rica, 2015)
The project aims to recommend the type of design to intervene Curridabat major roads with flexible pavement structure through visual classifications and techniques such as the methodology quality notes Q. Therefore it began ...