Tecnológico de Costa Rica
  • ¿Cómo publicar en el Repositorio TEC?
  • Políticas
  • Recursos Educativos
  • Contáctenos
    • español
    • English
  • español 
    • español
    • English
  • Login
Ver ítem 
  •   Página Principal
  • Trabajos de Graduación
  • Biblioteca José Figueres Ferrer
  • Escuela de Ingeniería en Construcción
  • Licenciatura en Ingeniería en Construcción
  • Ver ítem
  •   Página Principal
  • Trabajos de Graduación
  • Biblioteca José Figueres Ferrer
  • Escuela de Ingeniería en Construcción
  • Licenciatura en Ingeniería en Construcción
  • Ver ítem
JavaScript is disabled for your browser. Some features of this site may not work without it.

Listar

Todo el RepositorioComunidades & ColeccionesPor fecha de publicaciónAutoresTítulosPalabras clavesTipo de Recurso EducativoDestinatarioEsta colecciónPor fecha de publicaciónAutoresTítulosPalabras clavesTipo de Recurso EducativoDestinatario

Mi cuenta

AccederRegistro

Estadísticas

Ver Estadísticas de uso

Valoración de los materiales aluviales presentes en el Río Reventazón para ser utilizados como enrocado en la Construcción del Proyecto Hidroeléctrico Reventazón

Thumbnail
Ver/
valoracion_materiales_aluviales_presentes_rio reventazon.pdf (7.689Mb)
Fecha
2009
Autor
Ruiz-Vásquez, Roy Gerardo
Metadatos
Mostrar el registro completo del ítem
Resumen
The development of this paper took motivation from the characterization of the alluvial material from the Reventazón River in two possible extraction places, to be applicable for the dam construction. A detailed valoration of the material is the main purpose of the paper. These materials are in two extraction places that were establish such as Carazo and Presa places, this was made because of the application of a series of index test where granular material, abrasion, absorption, specific gravity, accelerated intemperismo, volumetric heaviness, relative density, grain rupture, point load, unidimentional compression and mineralogical classification, which will be used to give a geotechnical criterion which is supported with the application of several concerning theories, that will give crucial parameters to consider in the dam design such as the effective angle of internal friction of the material, the deformational module and the cut resistance from them. At the end of the application of these index test, and from the methodologies of the established applications to determine the designed parameters, satisfactorial results are obtained from the investigated theory, moreover differences are established from the analyzed and studied extraction places. As conclusion, the material from the extraction places, present similar characteristics with small variation among both materials.
Descripción
Proyecto de Graduación (Licenciatura en Ingeniería en Construcción) Instituto Tecnológico de Costa Rica, Escuela de Ingeniería en Construcción, 2009.
URI
https://hdl.handle.net/2238/6069
Compartir
       
Métricas
Colecciones
  • Licenciatura en Ingeniería en Construcción [551]

|Contáctenos

Repositorio Institucional del Tecnológico de Costa Rica

Sistema de Bibliotecas del TEC | SIBITEC

© DERECHOS RESERVADOS. Un sitio soportado por DSpace(v. 6.3)

RT-1

 

 


|Contáctenos

Repositorio Institucional del Tecnológico de Costa Rica

Sistema de Bibliotecas del TEC | SIBITEC

© DERECHOS RESERVADOS. Un sitio soportado por DSpace(v. 6.3)

RT-1