Escuela de Ingeniería en Construcción: Envíos recientes
Mostrando ítems 261-280 de 594
-
Propuesta de mejoramiento de la productividad de procesos constructivos en proyectos de la empresa Volio y Trejos
(Instituto Tecnológico de Costa Rica, 2018)The topic developed consists in the improvement of productivity of construction processes in the projects, CEDI Coris and iFreses developed by Volio y Trejos Asociados construction company, through an improvement plan ... -
Metodología para la evaluación de la seguridad estructural de puentes
(Instituto Tecnológico de Costa Rica, 2018)The objective of the present work is to show the methodology to perform a reliability analysis in a prestressed concrete girder bridge, based on deformation data obtained from a diagnostic load test. It was developed three ... -
Guía para la gestión del alcance, tiempo y costo de los proyectos de Desarrollos Mega
(Instituto Tecnológico de Costa Rica, 2018)The present proposal of the graduation project has as a general objective the preparation of a guide for the administration of the scope, time and cost of the construction projects of the organization Desarrollos Mega, ... -
Propuesta de protocolo para la correcta aplicación de fibra de carbono en losas de concreto en la readecuación de puentes
(Instituto Tecnológico de Costa Rica, 2018)The lack of a permanent process of maintenance for bridges in Costa Rica, for many years and the increasing of the capacity of transport vehicles have had a significant impact that had damaged some structures which were ... -
Modelo para mejorar la regularidad superficial mediante la técnica de cepillado
(Instituto Tecnológico de Costa Rica, 2018) -
Plan para la mejora en la gestión de los procesos de programación, elaboración de presupuesto, control y calidad de obra en la Empresa D’QS S.A.S. de Medellín, Colombia
(Instituto Tecnológico de Costa Rica, 2017)The developed work consists in the intervention of four constructive process from the company D’QS S.A.S. in Medellín, Colombia. The objective is to develop an integral plan for improve the management of the processes of ... -
Aplicación de la filosofía BIM en la administración y registro de la información del proyecto de construcción Escazú Village
(Instituto Tecnológico de Costa Rica, 2017)The following report develop the improvement of the process of documentation for the electromechanical equipment and systems, through the BIM philosphy, within Escazú Village project by the company Bilco Costa Rica. The ... -
Modelaje no lineal de metodología de reparación y rehabilitación de la Pila N°3 del puente sobre el Río Grande de Tárcoles en la Ruta N°34 mediante FRP
(Instituto Tecnológico de Costa Rica, 2017)The main purpose of this project is the simulation with nonlinear modeling tools of a repair methodology of a post-tensioned bridge pier by means of Fiber Reinforced Polymer Sheets (CFRP). From the detailed study carried ... -
Mejoramiento de procesos constructivos en muros de la Empresa Constructora Volio y Trejos
(Instituto Tecnológico de Costa Rica, 2017)Measuring how much production is obtained when constructing is an issue that has been increasing little by little along with construction companies because they seek to optimize expenses and increase profit every day. The ... -
Transformación de una antigua vivienda en locales comerciales
(Instituto Tecnológico de Costa Rica, 2017)The next project consists of the transformation of a two-storey house, to give it a use of commercial premises. It is the result of a structural analysis and design carried out to ensure its stability when the demolition ... -
Implementación de software de análisis y diseño en el proyecto de consultoría: Diseño de la Ampliación de las Rutas Nacionales Nos. 3 y 106, sección: Barreal-Lagunilla-Valencia, para la empresa IMNSA Ingenieros Consultores S.A.
(Instituto Tecnológico de Costa Rica, 2017)The need to implement specialized software in the number and spatial analysis of road infrastructure projects gave rise to the present graduation project. The implementation of software allowed to simplify and streamline ... -
Comparación entre un diseño realizado mediante un análisis estático y uno dinámico de historia en el tiempo para una estructura de mezanine sometida a vibraciones
(Instituto Tecnológico de Costa Rica, 2017)This work consists of an evaluation of the vibrations in a mezzanine structure designed by a static analysis, using a live load using instead of the real live load exerted by a machine on the structure. A design of the ... -
Evaluación y reparación de vigas de concreto reforzado de puentes en Costa Rica por medio de materiales FRP
(Instituto Tecnológico de Costa Rica, 2017)The use of fiber reinforced polymers (FRP) is a relative new technique in Civil Engineering, but they have shown significant increases in the ultimate strengths. This materials have higher mechanical properties than others ... -
Desarrollo de correlaciones para determinar el potencial a licuefacción aplicando el ensayo de penetración estática de piezocono (CPTu) en una cámara de calibración (CC)
(Instituto Tecnológico de Costa Rica, 2018)The main objective of this project was to develop correlations to determine the liquefaction potential of loose sand deposits, using the CPTu test; for this purpose, it was necessary to determine the behavior of CPTu ... -
Implementación de la filosofía Lean en la producción de concreto con autohormigonera
(Instituto Tecnológico de Costa Rica, 2017)The following investigation seeks the Lean philosophy implementation on the concrete production process with a self-propelled mixer, developing a methodology that involves Lean tools. At the beginning, the necessary ... -
Guía técnica y práctica para el diseño incremental de los caminos vecinales en función de la demanda y características topográficas y geotécnicas
(Instituto Tecnológico de Costa Rica, 2017)The present project consists in the creation of designs related to the area of road engineering, to be used mainly by the municipal regime in the neighboring roads of its competence. The main objective of the guide is to ... -
Dimensionamiento de la estructura de pavimento en la Calle 1 de San Isidro, Pérez Zeledón, utilizando la metodología mecanística empírica para diseño de pavimentos y creación de un plan de conservación
(Instituto Tecnológico de Costa Rica, 2018)To determine the structure of the pavement to be used in "Calle 1" of San Isidro, Pérez Zeledón the design of three types of flexible, semi-rigid, rigid pavements is proposed. These are designed by the mechanistic-empirical ... -
Análisis y mejoramiento de procesos constructivos, en los proyectos de la empresa VIVICON
(Instituto Tecnológico de Costa Rica, 2017)The objective of this document is to determine the productivity and performance of two building processes within the masonry work of two residential condominiums (Avenir and Cedro Real) built by Vivicon S.A. These two ... -
Implementación del software O4B en la gestión de control de proyectos en la Unidad Técnica de Gestión Vial de la Municipalidad de Osa
(Instituto Tecnológico de Costa Rica, 2017)The implementation project of the Open for Business software "O4B" in the Municipality of Osa consists of applying this program in the control of road projects, using information from the projects that were being executed, ... -
Guía para la revisión de diseños de puentes de la Unidad Ejecutora del Primer Programa de Infraestructura Vial (UE-PIV 1)
(Instituto Tecnológico de Costa Rica, 2017)Currently the development of road infrastructure in Costa Rica is having a significant boom due to the need to improve the service level of the national red road infrastructure. Vehicle bridges call for a large part of ...