Escuela de Ingeniería Electrónica: Envíos recientes
Mostrando ítems 81-100 de 619
-
Verificación funcional de un controlador de memoria para un dispositivo médico implantable.
(Instituto Tecnológico de Costa Rica, 2018)When a design is made for a product that needs to have a stable and continuous operation and also that is not expected to fail, the fucntional operation of the devices must be checked before delivering them to the end ... -
Propuesta de sistema de adquisición y transmisión de datos compatible con el SCADA Ovation en la planta geotérmica Las Pailas
(Instituto Tecnológico de Costa Rica, 2018)The project was developed in the Costa Rican Institute of Electricity (ICE), in the Geothermal Resources Service Center (CSRG), at the Instrumentation Maintenance Department, which is in charge of the maintenance and repair ... -
Modelo predictivo del desempeño eléctrico en función de la geometría de trazas de cobre con pestañas en circuitos impresos.
(Instituto Tecnológico de Costa Rica, 2018)The increase in data rates and the constant size reduction of digital systems, has exposed the shortcomings in structures that operate above the GHz range. A common problem is the appearance of noise due to electromagnetic ... -
Diseño e implementación de un prototipo de controlador de retrolavados automático para estaciones de filtración de agua
(Instituto Tecnológico de Costa Rica, 2018)This document shows the design and implementation process of an electronic device intended to control the backwash process of filters in water filtration stations property of Papagayo Servicios Generales PSG Ltda company’s, ... -
Diseño conceptual de un radio receptor y antena operando a longitudes de onda milimétricas para la observación de TeV Blazares desde el Observatorio Astronómico Nacional de San Pedro Mártir
(Instituto Tecnológico de Costa Rica, 2018)Blazars are one of the most important sources of energy in the universe. To understand the physical processes that take place in them, you need to get information in as many wavelengths as possible. Currently, in the ... -
Implementación de un modelo de simulación de una unidad de recepción con ecualización para aplicaciones de canales de transmisión de datos a alta velocidad
(Instituto Tecnológico de Costa Rica, 2017)Due to the constant increase of information traffic in electronics systems, in recent years new technologies have evolved rapid pace. This fact demands the design of new methods of digital communications that allow to ... -
Diseño de recuperador de reloj y datos para un canal serial de alta velocidad en un entorno de simulación de señal mixta
(Instituto Tecnológico de Costa Rica, 2018)The ITCR is developing a project for the simulation of a high-speed serial link at behavioral level in a mixed signal simulation environment. An important section of it is the development of a clock and data recovery ... -
Desarrollo de un sistema de comunicación redundante para las estaciones del AYA (Instituto Costarricense de Acueductos y Alcantarillados)
(Instituto Tecnológico de Costa Rica, 2018)Control and monitor remote processes is an industry trend, since make an operator get updated information from one or more running processes at the same time from different places, but when these processes are isolated a ... -
Implementación de un prototipo para la medición del pulso cardíaco mediante procesamiento de vídeo en la tarjeta de desarrollo JETSON TX1
(Instituto Tecnológico de Costa Rica, 2018)Non-invasive techniques for vital signs monitoring have been developing in the last years due to interdisciplinary fields like the computer vision and artificial intelligence. So, in RidgeRun Engineering, there is a need ... -
Diseño e implementación de un sistema de control automático para el movimiento del Kit de Robótica Costarricense: Krotic
(Instituto Tecnológico de Costa Rica, 2018)This report refers to the design and implementation of automatic position and speed control systems for the movement of the robotics kit Krotic. Research is carried out on the design of low cost quadrature encoders and ... -
Diseño y Validación de Antenas Flexibles en la Banda de 4G/LTE para Sistemas de Radio Comunicación Móvil con Geometría Esférica
(Instituto Tecnológico de Costa Rica, 2018)The present work shows the process of study, design, and implementation of multi-band exible antennas for 4G/LTE applications. These antennas must be able to adjust physically to the dimensions of spheric geometry and ... -
Monitoreo remoto con red de sensores, para el sistema de calentamiento por colectores solares de la piscina del TEC
(Instituto Tecnológico de Costa Rica, 2018)This document contain steps to develop a sensor network monitor system applied to the heat up pool system through solar thermal collector. The steps began with sensor's characterization to design a signal conditioner ... -
Implementación de un prototipo para la realización de la técnica de voltametría cíclica para aplicaciones biológicas o ambientales
(Instituto Tecnológico de Costa Rica, 2018)This report shown the development of an Electronic system based on Arduino and LabVIEW for electrochemical characterization of materials through cyclic voltammetry technique. Besides, the hardware that performs the ... -
Segmentación de células mediante técnicas de Procesamiento Digital de Imágenes para el rastreo de células cancerosas
(Instituto Tecnológico de Costa Rica, 2018)In recent years, the methodologies for cancerous cells identification in the microbiological scientific field, have been improving due to technological equipment insertion and the use of digital image processing and ... -
Rediseño del Sistema de Control de las Compuertas de la Antecámara y Desarenador de la Central Hidroeléctrica Canalete
(Instituto Tecnológico de Costa Rica, 2018)Coopeguanacaste R.L is a company responsible for generating electricity to different sectors of the province of Guanacaste, currently Coopeguanacaste R.L has two power plants. One of them is the Bijagua Hydroelectric Power ... -
Automatización de un módulo fotovoltaico rotatorio de un eje con disponibilidad de datos de manera remota
(Instituto Tecnológico de Costa Rica, 2017)The present document shows the design and implementation of the electronic part of a solar tracker of one axis with data availability remotely. To compare how much more power is generated from a system that follows the ... -
Diseño de una unidad de estimación de parámetros para un sistema de optimización de energía de uso en paneles fotovoltaicos
(Instituto Tecnológico de Costa Rica, 2017)In this work, a digital parameter estimation unit for an energy optimization system of photovoltaic panels was implemented. These parameters are necessary to search for the maximum power point in a photovoltaic panel. ... -
Desarrollo de plataforma UAS de ala ja para aplicaciones de Fotogrametría
(Instituto Tecnológico de Costa Rica, 2017)The conventional methods for estimating soil erosion, compromise result's reliability due to the complex installation of measuring instruments. Particularly Costa Rica is a ected by this phenomenon. The Electronics ... -
Design and Implementation of an Autofocusing Algorithm for the Goniometric Robotic Apparatus for Compound Eyes
(Instituto Tecnológico de Costa Rica, 2017)The goniometer robotic apparatus for compound eye at computational physics laboratory at University of Groningen is requiring an autofocus algorithm that is able to capture on focus images for the analysis of compound ... -
Whole-Body SAR simulations on a prolate spheroid using different plane wave polarizations up to 100 GHz
(Instituto Tecnológico de Costa Rica, 2018)A study on specific absorption rate (SAR) measurements using computational tools is presented. Using various numerical tools, ranging from full-wave simulators to physical optics, a prolate spheroid is irradiated by different ...